Six precautions for precision hardware parts processing
by：QY Precision 2020-03-19
Precision Hardware parts processing is a very cautious processing technology, and because of this, some precautions are also necessary when carrying out this processing technology.
We are specialized in cnc machining, hardware parts machining, precision hardware parts machining, etc. It has been a technical precipitation for many years.
Processing products cover machinery, automation equipment, aviation, automobiles, electronics, medical equipment, communication equipment and other fields.
The industry covers Guangzhou, Shenzhen, Dongguan, Pearl River Delta and other places.
Let's follow them to see the six precautions for precision hardware parts processing. 1.
Check whether the moving part is filled with lubricating oil before mechanical operation, then start and check whether the clutch and brake are normal, and run the machine tool 1-3 minutes, it is strictly forbidden to operate when the machine is faulty; 2.
Keep the correct posture at work and have enough spirit to cope with the work. If you find any physical discomfort, you should leave your job immediately and report it to the leader.
During operation, you must concentrate on your thoughts. It is strictly forbidden to talk and cooperate with each other. Operators should not operate in a state of irritability and fatigue to avoid accidents and ensure safe operation.
All employees check whether their clothes meet the job requirements before entering the job.
Do not wear slippers, high heels and clothing that affects safety. Wear a helmet with long hair; 3.
When replacing the mold, first turn off the power supply, and then start installing and debugging the mold after the punching Motor Department stops running.
After the installation and adjustment is completed, move the flywheel twice by hand to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the edge pressing ring is in a reasonable position; 4.
You must wait for all other personnel to leave the mechanical work area and take away the debris on the workbench before starting the power to start the machine; 5.
When working mechanically, it is forbidden to extend the hand into the slider work area. It is strictly forbidden to take and place the workpiece by hand.
Tools that meet the standards must be used when taking and placing workpieces in the die.
If the machine is found to have abnormal sound or machine failure, immediately turn off the power switch for inspection.
After the machine is started, it is transported by one person and operated mechanically. Others are not allowed to press the electric construction or foot on the foot switch board, and they are not allowed to put the hand into the mechanical work area or touch the moving part of the machine by hand; 6.
When you get off work, you should turn off the power supply and arrange the finished products, scraps and sundries on the post to ensure that the working environment is clean and safe.
The above are the six precautions for precision hardware parts processing, for reference only.
Shenzhen fuchengxi technology can produce products satisfactory to customers according to their different requirements. Welcome to order.