CNC Customize Parts Professional Solution & Processing Provider

Precautions for precision hardware parts processing

by:QY Precision      2020-03-19
In every industry, it is not easy to do any technology, and there will be inevitable dangers. Take precision hardware parts processing as an example, it can be said to be a highly dangerous processing technology in CNC processing. In fact, we can all use some precautions to avoid these dangers. However, many employees in our daily operation do not care about these details. Here is a detailed explanation by Shenzhen precision hardware parts processing factory fuchengxi technology. First, precision hardware parts processing check whether the moving part is filled with lubricating oil before mechanical operation, then start and check whether the clutch and brake are normal, and run the machine tool 1-3 minutes, it is strictly forbidden to operate when the machine is faulty. Step 2: Keep the correct posture at work and have enough spirit to cope with the work. If you find any physical discomfort, you should leave your job immediately and report it to the leader. During operation, you must concentrate on your thoughts. It is strictly forbidden to talk and cooperate with each other. Operators should not operate in a state of irritability and fatigue to avoid accidents and ensure safe operation. All employees check whether their clothes meet the job requirements before entering the job. Do not wear slippers, high heels and clothing that affects safety. Wear a helmet with long hair. Step 3: turn off the power supply first when replacing the mold, and start installing and debugging the mold only after the punching movement Department stops running. After the installation and adjustment is completed, move the flywheel twice by hand to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the edge pressing ring is in a reasonable position. Step 4: you must wait for all other personnel to leave the mechanical work area and take away the debris on the workbench before starting the power to start the machine. Step 5: When working mechanically, it is forbidden to extend your hand into the slider work area. It is strictly forbidden to take and put the workpiece by hand. Tools that meet the standards must be used when taking and placing workpieces in the die. If the machine is found to have abnormal sound or machine failure, immediately turn off the power switch for inspection. After the machine is started, it is transported by one person and operated mechanically. Others are not allowed to press the electric construction or step on the foot switch board, and they are not allowed to put the hand into the mechanical work area or touch the moving part of the machine by hand. Step 6: When you get off work, you should turn off the power supply and arrange the finished products, scraps and sundries on the post to ensure that the working environment is clean and safe. We are always talking about safety first, just in case. But how many people are always thinking about it? Therefore, no matter what machine is being operated or precision hardware parts are being processed, attention should be paid to ensure personal safety and retain revolutionary capital.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: