CNC Customize Parts Professional Solution & Processing Provider

cnc training in chennai

by:QY Precision      2019-12-28
Some limitations of CNC control machines depend on their age and complexity, and CNC machines can be limited to their ability to control and drive systems.
Most CNC controllers only know about linear motion and arcs.
In many machines, arcs are also limited to the main XYZ plane.
The motion of the rotating axis can be considered as linear motion, just degree rather than distance.
To perform angle cnc training on the spindle in Chennai, create arc motion or straight line motion, two or more axes must be inserted (
Move exactly in a synchronized way)together.
Linear and rotation axis also can at the same time insert.
In the case of a five-axis machine, all five must be fully synchronized-this is not an easy thing to do.
The machine controller receives and processes incoming data, sends commands to the driver system, and monitors the speed of the machine\'s speed and location.
The old and cheaper machines are obviously less capable in this regard, just as the old computers are not working very well and are slower (if at all)
Higher requirements than new tasks.
The typical problem with interpreting 3D and spline data firstA is how to set up files and do CAM programming so that machines that perform parts can process data smoothly and efficiently.
Since most CNC controls only understand arcs and lines, in Chennai, any form that cannot be described with these entities needs to be converted into available cnc training.
The typical thing that needs to be converted IS curve, I. e.
General and 3D surfaces that are not arcs or lines.
Some desktop machine systems don\'t understand the arc either, so everything has to be converted into a broken line.
The curve can be divided into a series of line segments, a series of tangent arcs, or a combination of the two.
You can imagine that the first option is a series of chords on your curve, touching the curve at each end, with a certain deviation in the middle.
Another way is to convert your curve into a broken line.
The less fragments you use, the rougher the approximation, and the more faceted the result is.
Going more carefully will increase the smoothness of Chennai cnc training, but it will also significantly increase the number of market segments.
As you can imagine, a series of arcs can approximate your curves within tolerance with fewer, longer parts.
This is the main reason to prefer arc conversion compared to simple polyline conversion, especially when using old machines.
With new ones, there are fewer problems.
Imagine the surface as a spline approximation of the same kind, multiple times in the cross direction, with a space in the middle (
Usually called stepover).
In general, the surface is done using all line segments, but it is also possible to use a combination of arcs or lines and arcs.
The size and number of segments are determined by the required accuracy and the method of selection, which will directly affect the execution.
Too many short segments will block some old machines, and very few short segments will form a face section.
The CAM system is usually the place where this approximation is carried out.
With a skilled operator who knows what the user needs and what the machine can handle, there is usually no problem.
However, some CAM systems may not be able to handle curves or some cnc training in Chennai-type surfaces, so you may need to first convert entities in CAD software (Rhino)
Before entering CAM.
Translation process from CAD to CAM (
Through neutral formats such as IGES, DXF, etc. )
Depending on the quality of the import/export functionality of the program, sometimes it can also cause problems.
Common conventions used to describe CNC programs if all cuts are made on the same plane, your item can be: 2 axis.
In this case, the tool is in Z (vertical)plane.
In general, the x-axis and y-axis can be inserted together at the same time to create oblique lines and arcs. 2.
If all cuts are made entirely on a plane parallel to the main plane, but not necessarily at the same height or depth, then 5 axes.
In this case, the tool can be in Z (vertical)
Change the plane of the level, but not at the same time as the X, Y motion.
An exception may be that the tool can spiral interpolation, that is, make a circle in X, Y, and move at the same time in Z to form a spiral (
Thread milling, for example).
A subset of the above is that the machine can insert any two axes at the same time, but not three at the same time.
For example, by cutting in the XZ or YZ planes, this does make it possible for a limited number of 3D objects, but it is much more limited than the complete 3-axis interpolation.
3 axis if your cutting needs to control the movement of X, Y, Z axis at the same time, this is the most free
Surface is required.
If it includes the above plus 1 rotation axis motion, it is 4 axis.
There are two possibilities: 4 axis interpolation at the same time (
Also called True 4 axis).
Or just 4 axis positioning, where 4 axis can relocate the part between 3 Axis operations, but it will not actually move during machining.
If the above plus 2 axis of rotation motion is included, it is 5 axis.
In addition to the Real 5-axis machining (
5 axis moving at the same time during processing)
You also often have 3 plus 2 or 3 axis machining, 2 separate shafts are only positioned, 4 plus 1 or continuous 4 axis machining in rare cases, only positioning
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: